Cobra CDR 840 dashcam rear view mirror mount
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Mounts your dashcam directly to your rear view mirror. Eliminates the need for suction cup and sticky pad mounts.
- Ocena
- 0 / 5
- Polubienia
- 2
- Pobrania
- 24
- Wydruki
- 0
- Wyświetlenia
- 437
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Automotive
- Licencja
- Creative Commons — Attribution
Free yourself from the unreliable suction cup mount and mount your front dash cam directly underneath the rear view mirror. Made for the Cobra CDR 840. Mount with M3 hex screws.
I tested this mount with both unannealed PLA and PC. The PLA mount sagged within a few weeks. The Polycarbonate mount using Polylite PC has been holding stable with no loosening in 100+ degree temperatures in the Maryland summer. Annealed PLA may work but it's not tested yet.
I modified another mount I previously found but cannot find the original source anymore. I shortened the shaft of the mount for a more seamless look that doesn't hang as low to obstruct the view and made the lower portion one single piece for strength.
I modified an original model found online in the past to make it stronger and more compact but can't find the original anymore.