1 / 12
Handwheel - Estlcam - ColdEnd - OCS2 - WiFi
Zamów wydruk tego modelu
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
This is my handwheel design for the ESP32 Panel PCB with combined controls for Estlcam and the ColdEnd32.
- Ocena
- 0 / 5
- Polubienia
- 2
- Pobrania
- 39
- Wydruki
- 0
- Wyświetlenia
- 583
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Other Ideas
- Licencja
- Creative Commons — Attribution
SzczegółyPliki (14)Wydruki i komentarze (Wydruki: 0) (Komentarze: 0)Remiksy (0)Kolekcje (11)Powiązane
This is my handwheel design for the ESP32 Panel PCB: https://shop.altholtmann.com/ESP32-Panel-Platine/SW10030
Features:
- WiFi control over an OPEN-CNC-Shield 2
- WiFi control over an ColdEnd32
- Web interface for configuration
- Space for Powerbank
- Adjustable(I have included.STEP and .f3d files)
Parts:
- 6x Momentary Buttons 16 mm
- 1x Lachting Button 16 mm (ENA function)
- 3x 10K Poti
- 1x 4-Axis Joystick(3-Axis + Button)
- 1x 0.96" I2C OLED Display
- 1x On/Off switch
- 8x 3D inserts: M3 - diameter 5 mm - length up to 6 mm
Check out this YouTube Video for more Information(german): https://youtu.be/H5HAdbaM4jw
More Links:
- Software/Firmware ESP32 Panel: https://github.com/timo1235/ocs2.x-esp32-panel-software
- Software/Firmware OCS2: https://github.com/timo1235/ocs2.x-esp32-software
- Software/Firmware ColdEnd32: https://github.com/timo1235/ColdEND32-WiFi
I have included the files for different PCB versions.
- All PCBs up to version 1.05
- All PCBs from version 1.06 and above (Only the Power USB connector and the position of the RJ45 Socket changed)
- PCB integrated battery - this case does not need a powerbank since the PCB has onboard 18650 batteries
Print information:
- May print the Front with support
Print Settings
Supports:
Yes
Category: DIY