Wall Mount for Black+Decker Extreme Cordless Vacuum Cleaner
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
A chunky wall mounting bracket for the Black+Decker POWERSERIES Extreme Cordless Vacuum.
- Ocena
- 0 / 5
- Polubienia
- 5
- Pobrania
- 107
- Wydruki
- 0
- Wyświetlenia
- 638
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Other House Equipment
- Licencja
- Creative Commons — Attribution — Noncommercial
This model was deliberately made chunky to handle the weight of the cordless vacuum with the battery and attachments.
Print it oriented with the back of the mount on the build plate , 15% infill with a 0.2mm layer height will work fine, and you'll need “snug” supports for the overhangs.
If attaching to a wooden wall then the top screw holes will fit two 3x35mm screws and the bottom will fit two 3X25mm screws, both screw ends will extend about 10mm past the back of the bracket. You may want to drill out the holes if they're a bit tight.