1 / 3
Hextraction Ball-Catcher & Mount
Zamów wydruk tego modelu
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Make sure your balls don't fly free anymore with this gutter ramp and end-zone mount combo for your Hextraction board!
- Ocena
- 4,5 / 5
- Polubienia
- 65
- Pobrania
- 221
- Wydruki
- 2
- Wyświetlenia
- 2065
- Oceny
- 2
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Puzzles & Brain-teasers
- Licencja
- Creative Commons — Attribution — Noncommercial — Share Alike
SzczegółyPliki (2)Wydruki i komentarze (Wydruki: 2) (Komentarze: 5)Remiksy (0)Kolekcje (101)Powiązane
! v1. of the ball-catcher combo is ONLY compatible with the fancy board variant of Hextraction which uses gutters. A future version for the basic board may/may not be made !
Print Settings:
- No supports should be required
- Both have been printed successfully with a 0.28 layer height (0.2 may make the Hextraction logo at the front of the mount look nicer)
Fewer loose balls are just TWO prints away:
- x1 - HexBallCatcherMountV1 (Once printed, place the 2 extraction end-zones on top)
- x1 - HexGutterRampV1 (the two prongs should easily slide into the back of the mount)
Why use the mount?
- Like me, you're tired of balls going everywhere and want to play instead of chasing them
- You don't want the board to be as steep and want to flatten out the end-zones
Known Issues (future version may fix these issues):
- The game board occasionally slides backward off the mount
- This model will not stand on its own until the balls or game board are placed on top
To learn the original game: https://www.playhextraction.com/how-to-play
To support Hextraction's creator: https://www.patreon.com/zackfreedman