1 / 3
Hextraction Ball-Catcher & Mount
Order a print of this model
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
Make sure your balls don't fly free anymore with this gutter ramp and end-zone mount combo for your Hextraction board!
- Rating
- 4.5 / 5
- Likes
- 65
- Downloads
- 221
- Makes
- 2
- Views
- 2,065
- Reviews
- 2
Updated at source:
Model information
- Source
- Printables
- Category
- Puzzles & Brain-teasers
- License
- Creative Commons — Attribution — Noncommercial — Share Alike
! v1. of the ball-catcher combo is ONLY compatible with the fancy board variant of Hextraction which uses gutters. A future version for the basic board may/may not be made !
Print Settings:
- No supports should be required
- Both have been printed successfully with a 0.28 layer height (0.2 may make the Hextraction logo at the front of the mount look nicer)
Fewer loose balls are just TWO prints away:
- x1 - HexBallCatcherMountV1 (Once printed, place the 2 extraction end-zones on top)
- x1 - HexGutterRampV1 (the two prongs should easily slide into the back of the mount)
Why use the mount?
- Like me, you're tired of balls going everywhere and want to play instead of chasing them
- You don't want the board to be as steep and want to flatten out the end-zones
Known Issues (future version may fix these issues):
- The game board occasionally slides backward off the mount
- This model will not stand on its own until the balls or game board are placed on top
To learn the original game: https://www.playhextraction.com/how-to-play
To support Hextraction's creator: https://www.patreon.com/zackfreedman