Sandman Hexlamp Weighted Base Remix for IKEA Storuman Lamp
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Remix of Honeycomb lamp at 120mm for use with Ikea Storuman hardware, and an empty chamber sealed with beveled screw cap
- Ocena
- 5 / 5
- Polubienia
- 72
- Pobrania
- 174
- Wydruki
- 1
- Wyświetlenia
- 1456
- Oceny
- 1
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Office
- Licencja
- Creative Commons — Attribution — Noncommercial — Share Alike
This is a remix including an unaltered shade and a newly designed base to use the hardware of the ¿now discontinued? Ikea Storuman lamp that I broke.
https://www.amazon.com/IKEA-STORUMAN-603-586-28-Table-Lamp/dp/B076YH6VL4/ref=cm_cr_arp_d_product_top
The base has a hollow chamber accessed by a bevelled screw lid, using remixed threads. The purpose of the chamber is to hold weighted material in order to make the lamp more stable.
It is recommended to combine the base and your choice of shade digitally before printing.
Print settings (shade):
There are two versions with different center wall thickness:
• 0.8mm - best for more opaque filaments - should be printed with 0.4mm line width
• 1.0mm - best for more translucent filaments - should be printed with 0.5mm line width
Both should print best at 0.204mm layer height to obtain even spacing in Z.
Remix lineage (lamp):