1 / 4
Simple phone holder for car vent
Zamów wydruk tego modelu
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Phone holder that fits into car vents. Dimensions can be modified with the provided Fusion 360 projects.
- Ocena
- 4,923 / 5
- Polubienia
- 126
- Pobrania
- 1765
- Wydruki
- 13
- Wyświetlenia
- 6536
- Oceny
- 13
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Portable Devices
- Licencja
- GNU General Public License v2.0
SzczegółyPliki (4)Wydruki i komentarze (Wydruki: 13) (Komentarze: 14)Remiksy (2)Kolekcje (173)Powiązane
I really liked the original model due do its simplicity, but needed something that didn't require a charging cable. Changes I made are as follows:
- Charging cable mount removed. The bottom of the holder has plenty of room for any type of cable, and I added a lip to hold the phone in place without one.
- Hollowed out a big section of the holder that was previously solid. This saved material and print time, and the functionality is the same.
- Improved the mount for the vent clips so they don't fall out. They are now slightly compliant: simply insert them into the top slit and rotate to fasten.
The modifications I made are not perfect, but hopefully most size adjustments should still work in the Fusion 360 files.
Avoid printing with PLA if possible since it might deform in a hot car.