Iruma-Kun Rank Badges
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
All 10 (11) Rank Badges from Welcome to Demon School! Iruma-kun (plus a blank for you to add your own design to)
- Ocena
- 5 / 5
- Polubienia
- 10
- Pobrania
- 128
- Wydruki
- 1
- Wyświetlenia
- 922
- Oceny
- 1
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Props
- Licencja
- Creative Commons — Attribution — Noncommercial — Share Alike
For all your Welcome to Demon School! Iruma-kun needs!
To go alongside the Ring of Gluttony I made for my Iruma-Kun cosplay at Sakura-Con 2023 I also designed and printed a Rank 5 (He) badge.
I have now finished creating the other 9 ranks and here we are! (There's also a blank one in there for you to add your own!)
The badge symbols are based off of those seen in Chapter 168 of the manga (The Misfits Present: “Lilith's Red Carpet”) which is the best and clearest shots I could find. They are not pixel perfect representations, but whatever minor errors I made would get lost in the details of 3d printing anyways.
Printing Recommendations
- .2mm layer height or lower
- a 0.4mm nozzle will work, especially for the first 6.
- For Zayin through Yodh I recommend a 0.25mm nozzle.
- Ironing optional, but creates a nice effect depending on what filament you're using
- Should be paintable for MMU2S/AMS printing, otherwise just print in gold filament and use a black sharpie on the parts that need it.
- I used stick-on pin backs to attach them to my clothing, the back is a flat plane, so you do you.
Update 2024-11-27
- Add “Mephisto Special” Rank 5.5 badge