2329 modeli
Build Info: Parts can be printed from PLA. Higher grade magnets will produce more power (I used N52 grade). Coils can fit 350 turns of 0.4mm enamelled copper wire, but make sure the coils aren't too large for the template. All coil turn…
This is my first go at designing a full size printed Crankbait. I think the finished model and results (fish caught) where well worth the effort. The bait is printed in two halves and then glued together. (I used super glue) Three small…
10/12/2022: Uploaded the correct nut and lead. The first ones were mirrored. The drill was inspired by push drills such as this one by LoboCNC: https://www.printables.com/model/132326-push-drill-with-adjustable-chuck The chuck is based on…
"Igor, throw the switch!" "Yes, master." Instructions Check out the 2022 updated version posted here: https://www.printables.com/model/161850-frankenstein-lightswitch-plate-2022-version Update: It's coming up on Halloween so I figured…
Print with PLA, Spring with PETG, all without support, different colors. Use 2cm filament and fix it in the Bow, curve it to be parallel and use it as a pin to hold the cover on the surprise box (Suggest to oil part of the filament on the…
Surprisingly realistic and very convincing, I spent far too long than I would like to admit sculpting this. I hope you enjoy! I would love to hear how the prank goes for you in the comments. Scale up or down as necessary, standard size is…
DNA double helix with a X-ray diffraction-inspired base in honor of Rosalind Franklin. Remixed from DNA helix by linew (https://www.thingiverse.com/thing:3980700). Rosalind Franklin's research as a chemist and X-ray crystallographer was…
NOTE 2025: This design is OLD! I made this back in 2016 for my Makerbot Replicator 2. So the design might not fit on your print area. And you have to print it at the original size to use the metal bearings. Also the printers back then had…
I remixed the Precision Tweezers by M4NU to a cranked version. For that I chopped off the folding mechanism and added the 45deg angled legs. The folding mechanism is ideal for remodeling the legs and also in terms of “printability”…
All in one: Vier Varianten meiner Industrieschlüssel - immer griffbereit Vierkant: Durchmesser ca. 6mm; Kantenlänge: 8mm Dreikant: Durchmesser ca. 6mm; Kantenlänge: 8mm Schaltschrank (ohne Mittenloch): Durchmesser ca. 8mm; Seitenkanten…
This is version 2 of my Ultralight Crankbait. In this version I changed the shape a bit, added some gill details and it now uses preformed figure 8 hook hangers for tie on's. I used #0 stainless steel sinker eyes. You can get a 100 of…
Igor, throw the switch! Yes, Master. ---------- I originally designed this seven years ago, and figured it's high time I made some long needed cosmetic updates: The blade portion is now symmetrical in both the ON and OFF positions, the…
This Frankenstein head incorporates fascinating features: 3D printed, the hair part doesn't need supports, and the head was printed upside down with custom supports at key edges. An easy-access cap allows you to customize the internal…
Tohle je chytrý QR kód, který slouží pro zábavu zastřelit a který můžete ukázat svým kamarádům
This 100% 3D-printed mechanical solar system includes all eight planets, designed with custom gear ratios to precisely reflect their true relative orbital periods. To make the model practical in size, both the planets' physical sizes and…
Frank is a good-natured giant who helps out at the mortuary by day and spins tunes at the Club by night. He doesn't get a lot of sleep, and it shows.
This is just another Crankbait I made.. this one a redesign of a lure I carved out of balsa wood 25 years ago. I'm still working out the best infill settings so this is a* "Work in Progress" * for now. I did a short write up on my website…
A set of 3 Halloween bookmarks featuring a ghost, Frankenstein, and a pumpkin jack o lantern. They’re quick to print, thin enough to slip into any book, and perfect as little seasonal gifts or party favors. Print them in festive colors…
I sculpted/modeled this Weiner Dog figurine in the likeness of my own dog (Frank). He's the best dog in the whole world, so I figured I'd put it online for everyone to enjoy! If you print him too small you could have issues with the…
Darf ich vorstellen: Schraubwinkel für Schränke, Regale, Fächer etc. Die Konstruktion ist auf Festigkeit optimiert und lässt sich problemlos ohne Stützen drucken. Brauchst eine andere Größe? Anderen Lochdurchmesser? Schreib mich an. Nicht…
This small box fits a standard sized gift card and is secured closed by 16 screws around its perimeter. Also included is a file for a small screwdriver to complete the gift. 12/16/24 - Added a screw with slightly more tolerance. Try…
Frankenstein Bust. The back of the head is Meh. Did not pick up the UV displacement. Really no UV resolution towards the back so it was just flat.
To be honest I've never really made lures before, I've modified spinners a bit and tied crappy looking flies before but seeing Marling Baits on youtube make the tiniest crankbait, inspired me to make a tiny crankbait of my own. I present…
For removing crank cap. Print Settings Rafts: Doesn't Matter Supports: Doesn't Matter Category: Tools
Originally designed by Frank Lloyd Wright for the Ennis house built in Los Angeles, 1924. This house was one of a handful of “textile block” projects created by Wright, a system of interlocking concrete blocks with bold patterns that…
Update 21.11.2023: added new part slider with clearance fit and the crank with bigger hole for screw A simple crank mechanism Other necessary components: 1x screw M3-10 I recommend to print parts crank.stl and slider.stl wiht 60% of…
When printing, use either rafts or a brim and add supports. Just leave them as they are when slicing. Thank you so much for 100 downloads! Buy me a coffee!
Little helper to unlock the crank arm cap off Shimano Hollowtech II cranks. The thumb screw is optional. Fits a 6mm allen key or a 16 mm wrench. Printed with PLA, 0.3 mm layer height.
A spider that jumps out of the drawer and will give your guests a scare at your next Halloween party! All you need is a rubber band and some double-sided tape. The spider's legs are heated at the joints and then bent. Clip the parts…
Any feedback would be greatly appreciated . Nozzle: 0.4-0.8mm Layer: 0.24-0.4 (Recommended) Supports needed (organic/tree support) Scale it as you like :)
Required for assembly: 5 mm steel balls, you can use lead split shot but I haven't tried it 0.8 mm (0.031 inches) Stainless Steel wire. If you have thicker wire let me know I can make more versions with bigger holes. 5 mm eyes Super Glue…
Hand Crank for the Pastamatic Manual crank for the Pastamatic Filament Spool Winder Pastamatic - Filament Spool Winder Bambu Lab X1C/P1P AMS link: https://www.printables.com/model/466883-pastamatic-filament-spool-winder-for-bambu-lab-x1c…
Rank pips from Star Trek. There are backs that can be bent to fit into a collar. Uses 6x2mm magnets. Update March 30 2024 - There are now insignia for cadets, enlisted crew, commissioned officers, and admirals. Use color swapping for the…
A simple hand crank to operate some of my (or other's) fidget toys that have a hex hole for standard (6.3mm) tool bits or hex pencils (7mm). I made that because something like that was requested, and I'm happy it was, since this does also…
If you print it QR code down you will need supports but you can use two colors. I recommend scaling it up a bit.
This is a clear lip version of my Crankbait Fishing Lure . I used the included lip template to trace and cut a lip out of .093 clear lexan polycarbonate sheet. * I used #4 Treble Hooks and #3 Split Rings on these. * See Crankbait Fishing…
For a commercial license, please visit our website to become a Mythic Merchant: https://arsmoriendi3d.com/mythic-merchant/ Fits 12oz, 330ml or 375ml cans. Comes in multiple versions, with and without a handle and with and without a…
As I was installing a Stages crank arm on my Shimano 105 crankset I realized too late that I was missing the tool to remove and adjust the crank cap. I MacGyver'd my way through it but decided to make a tool should I ever need to adjust…
Hi there. I'd like to present my latest project. Turbine hand cranked blower. it uses planetary gear with 1:6 ratio so for every crank turn the blades of turbine performs full six revolutions. It's great for barbecue and just for fan. All…
I got my inspiration from JustBaselmans thinking “Huh, what if I could turn that with a crank?" This was an educational project to me as I'm still learning the ins and outs of Onshape. It's not elegant, it's far from perfect, but I made…
Spinny, the strip cutter.
This model is compatible with the lego system.
We are soon launching a KICKSTARTER ! Assembly documentation can be found here: https://outofmarbles.com/pages/docs This is the hand-cranked version of our bucket lift. Check our other models for motorized version. You will also need to…
Join here to get access: https://www.patreon.com/kogi3d I went full Halloween mode with my new Articulated Frankenstein Hand! This creepy hand features a chunky Frankenstein-inspired design with stitched details, scars, fingernails, and…
This is another lipless rattletrap type crankbait I designed. This is a little different then a normal type lipless lure as I tried to make the body a little wider in hopes it would maybe dive a little deeper or have a different kind of…
This is a simple model that will turn your fridges water dispenser into a super soaker. this device install quickly and is very discrete. The print will take about 5 minutes maximum on .1mm layer height this print will fit fridges with an…
All 3d-printed parts, including axles. Proof of concept, it doesn't really move much air - hand cranking at a reasonable pace, you can feel a little bit of movement. 1:8 gear ratio seems to be a bit of a sweet spot, but there's likely too…
My primary printer is a Prusa i3, and the bed size was just not enough to handle the original design. I had pretty good success with the 80% build by MlePh ( https://www.thingiverse.com/thing:3410556 ), but I wanted to scale up in size.…
My son suggested a crank handle might be easier to use than the original twist handle. It also provides more leverage to launch the propeller further. We tested two different lengths. Both files are included. The long handle provides more…
To assemble: Print the model. Glue 3 or 4 BBs, depending on how hard you want it to float, into each of the 4 weight chambers. (Leave a few loose if you want the bait to rattle) Bend and glue wire in for the line tie and hook hangers.…
Print in place rotating handle allows a tight grip, it rotates in your hand.
its a 1:1 iPhone 13 Pro Model.
The 3D design of the moth is not perfect, I don't know how to work in Blender, but it fulfills its purpose of scaring perfectly. Print from black filament, preferably matte, with supports as in the picture (you can also use my gcode).…
This model is compatible with the lego system.
Magnet Ivy – Flexibler Efeu-Kühlschrankmagnet mit beweglichen Ranken (Print-in-Place) Mit Magnet Ivy holst du dir ein stilvolles, natürlich wirkendes Dekoelement an jede magnetische Oberfläche – ob Kühlschrank, Whiteboard oder…
This spool winder works with any(?) 1kg spool with an inner diameter betweeen 40 and 60mm. This model is a Remix and contains all parts needed from the original (See Luke's 3D Spool Winder v3). I made this for my wife so she can store her…
Here is the model for Franky Bear. Franky is a good but Spooky Friend of Barry, and like his friend he seems to just want to be your friend too, do you have space for Franky? maybe he can keep Barry Company. I hope you enjoy, and Happy…
Figurine of a grumpy mini Frankenstein. https://youtu.be/svMf4KwcbEI Printing Can be printed in both FDM and resin Supports are NOT required when printing upside down with good cooling Minimal infill required All Sculptember Models Ghost…
~75mm crank bait in 4 pieces with wight/sound chamber. Print the following pieces 1 x Left 1 x Right 2 x Pin Add wire to hold hooks, glue, ad the right size hooks and go catch the big ones! and to add the extra toch, paint it in your…
This is a flat side Crankbait type lure. I found a simple pattern online for making them out of wood and decided to duplicate it in CAD for 3D printing. There are two versions of this one... the first one I printed looked awful skinny so…
Print it in PETG for more flexiblity - or TPU if you like.
This version adds all the improvements in V2 ( https://www.printables.com/model/193985-eggbeater-drill-version-2-fully-printed-no-support ) Assembly instructions, apart from the added fasteners are all the same for this version, and is…
Dive into the architectural elegance of Frankfurt am Main with this 3D model, showcasing the city's iconic skyline! Model created using OSM as well as manually reconstructing several buildings. The Model is completely square. I printed it…
Plant grid in Voronoi style for Aquariums. Size ist 180 mm high, 80 mm wide.
This is Cranky Cat in his ultimate form: squished in a tiny box, now with a keyring. Take the mood with you – whether it's your bag, your backpack, or your daily reminder that joy is optional. I’ve optimized the box so it can be printed…
Franken-Stein Can Coozie with flip top. Recommend at least 3 walls to make sure the top pegs can snap into the handle without breaking. If your printer can't do large bridges then a little support on the underside of the top part of the…
It's gonna be a little bit tricky printing the two side ones, but it's doable. Would appreciate some tips in my jar, thanks! paypal.me/lqapoca
The project images show how each font printed at 0.4 mm. The great news is that the best five I have found are all open-source and totally free! Small 3D Font Tier List Font Free Quality Notes S Osifont ✓ purpose-built for CAD (ISO 3098)…
Spider prank - (halloween) wall art, easy to print
Adapter for 1L/34oz Frank Green water bottles designed for car drink holders
Die beiden Seitenwände können gedruckt und anschließend verarbeitet werden. Die beiden Schrauben werden von außen mit Spax verschraubt. Die Löcher in den Ebenen sind so gewählt, dass die Schraube ordentlich Halt hat. Ebenfalls ist es…
This is a very simple garden gate latch, easy to print, easy to install. To assembly it, you will just need hardware mentioned below. I recommend using locking glue to secure the bolt and nut over time, and to grease the “bearing”: Print…
A simple combination of two models to make a fun little prank to apply to a tire valve
Bilder sagen mehr als 1000 Worte Pictures say more than 1000 words had updated the file because of better fit and more stable works fine my son love to open and close it :-) Category: Mechanical Toys
Das ist mein Closetsnap oder Kleiderschrank-schliesser! Die Anwendung ist einfach, Ausdrucken, dann den Haken an der Schrank Innenseite an die Gewünschte Stelle halten und Mit zwei Schrauben durch die Löcher Fixieren. Danach messen sie…
The King Frank legendary skin in brawl stars. Just one of these is worth 300 USD
If your camera doesn't have any means to rewind the film once you've finished shooting a roll, this can help you spend less time fumbling with the canister in the film changing bag. Print in the orientation the .stl files are in, layer…
For me to keep doing what I'm doing, please consider liking, downloading, and all the other good stuff, every little bit helps! :) Summary The Pythagorean cup is a drinking vessel designed to drain its contents via siphon action if it is…
My version of the Shimano TL-FC16 Hollowtech II Crank Arm tool. I needed to install the preload cap bolt into my GRX 810 crankset and it didn't come with the necessary tool. This follows the internal ridge of the crank arm bolt allowing…
Give a gift card to someone, with it in jail! A great prank to make it harder for your friend (victim) to open their gift card. When it's printing, drop the gift card in before the extruder gets to the top bridging layers.…
Schrankgriff Wikinger Mit einem Keltischen Knoten Mit Einschub für Mutter DIN 934 M4
Halloween Special Transformable Frankenstein to Coffin This is not my creation, but i found this model from Toymakr3d and it is so cool that i don't want to conceal it. If you like it --> press like it :-) Here the original description:…
Frank the little robo truck is part of the LITTLE ROBO family . The LITTLE ROBOs are different, small robots mixed with vehicles of all kinds. From construction machines to boats to aircraft and everything in between. The special feature…
Ich habe es mit 0,1 mm Schichthöhe gedruckt, kann sicherlich auch mit mehr gedruckt werden. Wer einen Farbwechsel möchte, bei der 1,6 mm Schicht fängt das Logo an. I printed it with 0.1 mm layer height, can certainly be printed with more.…
Frankenstein - Halloween Mask
In celebration of Valorant's upcoming release of its ranked mode, I made a 3d version of the Valorant badge. The differences in height on the badge allow for anyone that has a printer, with "change filament" enabled, to print their own in…
Printed with PETG, nozzle temp: 240, bed temp: 90, recommend printing with supports so that the axle holes are vertical.
This is a simplified version of mckgyver's preload adjuster tool for Shimano Hollowtech II cranks. While mckgyver did most of the work, I've made a few adjustments to make the model easier and quicker to print by removing the concave…
I though like bringing some more weirdness into the world by designing this little replacement for a aerator in a typical faucet Just exchange the existing one, make sure it points towards the user and let the madness begin. Warning:…
A crank with longer shaft for manual re-spooling when the hexagon adaptor for an electric drill is in place. With this crank you can turn the spool manually even when the electric drill adaptor is installed. The normal crank will collide…
Added a crank handle to the driven male spindle as I don't own a drill. While it takes longer than 2 minutes to wind, it works. Requires supports in the gap where the spindle meets handle Crank handle was taken from…
Original mesh by Matheus Rudo: Fallingwater House - Frank Lloyd Wright - Download Free 3D model by Matheus Rudo (@Matheus.Rudo) [6f2f682] (sketchfab.com) Fallingwater by legendary architect Frank Lloyd Wright is commonly regarded as his…
I am fairly new to JOTL, but I liked UnclePats player dashboard so much (lightweight, easily fits into the games box (even two of them like in my case), easily to understand but still versatile layout, ...) so much that I tried to improve…
Ich habe mich immer geärgert, dass das Eisfach des Thetford-Kühlschranks nicht offen blieb, wenn wir das Fahrzeug in den Winterschlaf geschickt haben. Natürlich geht auch ein Korken. Diese Ecke bleibt aber, wo sie hin soll. Mein…
Front Crank Seal Install Tool - Mazda MX-5 Miata BP Suits all Mazda B6/BP 1.6/1.8 engines (except those with the small nose crank) Simply start the seal on the front crank nose, then slide the tool in place and gently tighten down the…
CSGO / CS2 LE-GE Rank Keychains Ranks included: Legendary Eagle, Legendary Eagle Master, Supreme Master First Class, The Global Elite. Material Used: Bambu Filaments Background: Black PLA Stripes/Rank: Silk Gold PLA Supreme/Global Elite…
I made this crank with a separated knob for the Z rod of the Ender 3. The inner diameter is 8mm, so it can be used also on other printers with the same rod. The knob is not one piece with the crank so it's much confortable to old the knob…
These Ultralight Crankbaits were inspired by rallekralle11's tink crankbaits they are just a little more stream line but being so they don't have as much action (wobble) as his. They still work great and I caught a ton of Bluegills and…
