Shimano Hollowtech II crank cap installation/removal hand tool
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Quick-print hand tool that enables removal, installation, and adjustment of a Shimano Hollowtech II crank cap
- Ocena
- 4,9 / 5
- Polubienia
- 78
- Pobrania
- 953
- Wydruki
- 10
- Wyświetlenia
- 2071
- Oceny
- 10
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Outdoor Sports
- Licencja
- Creative Commons — Attribution — Noncommercial
As I was installing a Stages crank arm on my Shimano 105 crankset I realized too late that I was missing the tool to remove and adjust the crank cap. I MacGyver'd my way through it but decided to make a tool should I ever need to adjust or re-do the work.
This part prints very quickly and certainly gets the job done as a hand tool. My cap was not that tight, but if yours is hard to remove then you may need to buy a metal tool or apply a big pair of pliers to get it off.
The part shown was printed with BambuLab PLA-CF and worked just fine. If you plan to use this a lot or decide you want more strength, go with PETG or something a bit more robust.
Also, I've included two parts - one with a very grippy perimeter and one that's toned down a bit.
Hope it helps somone in the same bind I was in! Feel free to request any modifications and I'll do my best to accomodate.