Shimano Hollowtech II crank cap installation/removal hand tool
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
Quick-print hand tool that enables removal, installation, and adjustment of a Shimano Hollowtech II crank cap
- Rating
- 4.9 / 5
- Likes
- 78
- Downloads
- 953
- Makes
- 10
- Views
- 2,071
- Reviews
- 10
Updated at source:
Model information
- Source
- Printables
- Category
- Outdoor Sports
- License
- Creative Commons — Attribution — Noncommercial
As I was installing a Stages crank arm on my Shimano 105 crankset I realized too late that I was missing the tool to remove and adjust the crank cap. I MacGyver'd my way through it but decided to make a tool should I ever need to adjust or re-do the work.
This part prints very quickly and certainly gets the job done as a hand tool. My cap was not that tight, but if yours is hard to remove then you may need to buy a metal tool or apply a big pair of pliers to get it off.
The part shown was printed with BambuLab PLA-CF and worked just fine. If you plan to use this a lot or decide you want more strength, go with PETG or something a bit more robust.
Also, I've included two parts - one with a very grippy perimeter and one that's toned down a bit.
Hope it helps somone in the same bind I was in! Feel free to request any modifications and I'll do my best to accomodate.