Refined Fidget/Spinner Ring
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Quiet and slim fidget ring with simple assembly. Edit: May need a small drop of glue on the inside
- Ocena
- 5 / 5
- Polubienia
- 165
- Pobrania
- 1225
- Wydruki
- 5
- Wyświetlenia
- 4613
- Oceny
- 4
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Other Toys & Games
- Licencja
- Creative Commons — Attribution — Noncommercial — Share Alike
Just made some small cosmetic changes to this fidget ring that I liked. The spinning part had too much wiggle room for my liking, so I cut off about 0.5mm on the height. This gives it enough room to spin while still keeping it aligned. Then I rounded off any sharp edges on the casing of the spinning part, which makes it a little more aesthetically pleasing and comfortable to wear.
For users:
I used 0.2 mm layer height. The knurled pattern did not give my printer any trouble, but I am wearing a larger ring size so it might be easier to print than a small one.
This model has a 20.57 mm (size 11) diameter which can be scaled to fit your own size. [Example in the pictures]
Sanding down the Z seam can help it spin better.
You can wear it on whatever finger, but I find the index finger the most comfortable place to wear it because you can spin it with your thumb.
There is a tight fitting shell and loose fitting shell. I made the tight one hoping glue was not needed, but personally didn't have much luck. Feel free to try it out yourself.
Coincidentally, a contest for ring holders just came out. Take a look if you want a stand for your rings. https://www.printables.com/contest/386-ring-holders
Edit 1: Added some extra spinners but have not printed them out. They came from the creator's Thingiverse page which has more features and customization. https://www.thingiverse.com/thing:188275