Manual Peristaltic Pump
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
I made these pumps primarily to test something else where I wanted to use peristaltic pumps, but needed fine…
- Ocena
- 0 / 5
- Polubienia
- 17
- Pobrania
- 68
- Wydruki
- 0
- Wyświetlenia
- 1494
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Other Ideas
- Licencja
- GNU General Public License v3.0
I made these pumps primarily to test something else where I wanted to use peristaltic pumps, but needed fine control...I also just was curious how hard it would be to make a printed peristaltic pump :) Turns out, not too bad!
I used 3/8" OD vinyl tubing, but it will work with anything that would work compressed to 2mm. More details on the build here.
I printed mine from resin, primarily because the main bearing is integrated into the print (printed surfaces make the bearing races). So I think you could probably orient it for FDM to get the bearing races concentric perimeters to give a fairly smooth operation (although you may have to smooth down the seams).
Category: DIY