1 / 6
Bearing Block for tapered LM08UU bearings — zdjęcie 1
1 / 6

Bearing Block for tapered LM08UU bearings

Zamów wydruk tego modelu

Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.

Zapisane na tym urządzeniu.

LM08UU linear bearing block for tapered version of LM08UU bearing.

Ocena
0 / 5
Polubienia
7
Pobrania
49
Wydruki
0
Wyświetlenia
445
Oceny
0

Aktualizacja u źródła:

Informacje o modelu

Źródło
Printables
Licencja
Creative Commons — Attribution

LM08UU linear bearing block

This is my proposal of linear bearing block to be used together with tapered version of https://www.prusaprinters.org/prints/49078-lm08uu-linear-bearing
It is used for my Anet A6, but should fit on A8 as well and I assume on many other types based on Prusa I3.

The original Anet A6 is weak in terms of precision and stability of the heat bed. I always had some trouble with blocking or jiggling plate. So came the idea of the tapered bearings and this holder.
The bearing block has a shield for easily pushing the end stop switch.

The improvements to the original bearing block is

  • asymmetrical fixation to keep some freedom of movement for the tapered bearing
  • reduced weight (at least for the old aluminum type I do have)

Needed material:

  • 1x metric screw M3x12 + nut for each bearing block

 

History

Version 0.1.0

First published version and currently in use.

Print instructions

 

Rafts: Doesn't Matter

Supports: No

Resolution: 0.2mm or smaller

Infill:  20%

Filament: Doesn't matter 
 

Notes: 

For Printing please use wall line count: >= 4

 

 

 

 

Tagi