Voron V0 Umbilical - V0.2 Frame Mount (No end switch hole)
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Removed the hole that Y end switch cables used to go through on the V0.1 for extra chamber toastiness!
- Ocena
- 0 / 5
- Polubienia
- 21
- Pobrania
- 118
- Wydruki
- 0
- Wyświetlenia
- 1295
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Voron Parts & Upgrades
- Licencja
- GNU General Public License v3.0
Since the V0.2 is now sensorless, there was a hole in the frame mount that lets precious chamber temp out… not any more.
There are 2x versions:
V0.2_Umbilical_Motor_Mount - Use this for the stock Bowden setup on a v0.2 as it has the hole to let the reverse Bowden pass through.
V0.2_Umbilical_Motor_Mount_No_Bowden - Use this if you're using a non stock Bowden set up, such as URBI from Maple Leaf Makers, there is no hole in this one for reverse Bowden to pass through.
(I've linked the URBI in the remixed prints - highly recommend this mod!
Don't forget to post your makes for free Prusament!
Hex Pattern & Serial Number version can be found here.