Clothes-Pegs
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Having a bunch of brocken pegs I spent a few hours to extend the life of their metal springs and to convince my wife…
- Ocena
- 5 / 5
- Polubienia
- 48
- Pobrania
- 336
- Wydruki
- 4
- Wyświetlenia
- 1626
- Oceny
- 4
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Other House Equipment
- Licencja
- Creative Commons — Attribution
Having a bunch of brocken pegs I spent a few hours to extend the life of their metal springs and to convince my wife of the advantages of a 3D printer...
There is 2 versions for 2 different size of springs:
- 50-18-55:
5.0mm diameter of the spring, 18mm length of the wings, 5.5mm thickness of one half of a peg - 66-17-70:
6.6mm diameter of the spring, 17mm length of the wings, 7.0mm thickness of one half of a peg
The pegs are quite easy to print with no support. UV resistant filament (ASA) is recommended. But PETG and ABS should do as well.
Needed material:
Nothing except some springs from broken pegs
History
Version 0.1.0
First published version and currently in use.
Print instructions
Rafts: Doesn't Matter
Supports: No
Resolution: 0.4 mm
Filament: PETG or ASA