1 / 4
Bicycle / Bike Repair / Assembly Stand | Suporte de Manutençao Bicicleta — zdjęcie 1
1 / 4

Bicycle / Bike Repair / Assembly Stand | Suporte de Manutençao Bicicleta

Zamów wydruk tego modelu

Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.

Zapisane na tym urządzeniu.

Holds your bike while you are working on it.

Ocena
0 / 5
Polubienia
22
Pobrania
98
Wydruki
0
Wyświetlenia
1142
Oceny
0

Aktualizacja u źródła:

Informacje o modelu

Źródło
Printables
Kategoria
Tools
Licencja
Creative Commons — Attribution — Noncommercial — Share Alike

This support was something I was looking for a long time, I had already modeled a very simple version, but not as good as this version of chrism.

Thanks chrism!

I had a cable TV antenna, which I disassembled and used only its arm.

Using the original step file I made the base more robust and made a hole to fit the arm that had a 43mm diameter.

I drilled a hole vertically, so that the attachment to the arm takes place on two axes.

As I printed the pieces laterally, with the aim of making the vertical axis stronger and with no chance of breaks in the printing lines, I also made two holes that cross the piece for the insertion of two pieces of construction iron (5/16), like this ensuring that in a possible twist the iron holds the bike.

I used homemade filament recycled from pet bottles for printing and it was very resistant.

I left available in addition to the stls, the step and fusion360 files.

 

Parts needed:

  • Construction to conect the printed parts to. You can modify the CAD parts to do a different assembly.

Printed: 

  • Lower half
  • Upper half
  • Hand screw

Don't be too thrifty on the material!

Standard Parts:

  • 1x M6 x 60 bolt (ISO 4762)
  • 1x M6 hex nut self locking (ISO 7040)
  • 1x M8 x 100 hex bolt (ISO 4017)
  • 1x M8 hex nut (ISO 4032)
  • Optional: coil spring

Print Setup

  • Filament: Recycled PET from soda bottles
  • Layer Height: 0.3mm
  • Speed: 60mm/s
  • Raft: True

 

 

Tagi