1 / 4
Bicycle / Bike Repair / Assembly Stand | Suporte de Manutençao Bicicleta — image 1
1 / 4

Bicycle / Bike Repair / Assembly Stand | Suporte de Manutençao Bicicleta

Order a print of this model

We calculate the final price from your selected file. You review and accept it before payment.

Saved on this device.

Holds your bike while you are working on it.

Rating
0 / 5
Likes
22
Downloads
98
Makes
0
Views
1,142
Reviews
0

Updated at source:

Model information

Category
Tools
License
Creative Commons — Attribution — Noncommercial — Share Alike

This support was something I was looking for a long time, I had already modeled a very simple version, but not as good as this version of chrism.

Thanks chrism!

I had a cable TV antenna, which I disassembled and used only its arm.

Using the original step file I made the base more robust and made a hole to fit the arm that had a 43mm diameter.

I drilled a hole vertically, so that the attachment to the arm takes place on two axes.

As I printed the pieces laterally, with the aim of making the vertical axis stronger and with no chance of breaks in the printing lines, I also made two holes that cross the piece for the insertion of two pieces of construction iron (5/16), like this ensuring that in a possible twist the iron holds the bike.

I used homemade filament recycled from pet bottles for printing and it was very resistant.

I left available in addition to the stls, the step and fusion360 files.

 

Parts needed:

  • Construction to conect the printed parts to. You can modify the CAD parts to do a different assembly.

Printed: 

  • Lower half
  • Upper half
  • Hand screw

Don't be too thrifty on the material!

Standard Parts:

  • 1x M6 x 60 bolt (ISO 4762)
  • 1x M6 hex nut self locking (ISO 7040)
  • 1x M8 x 100 hex bolt (ISO 4017)
  • 1x M8 hex nut (ISO 4032)
  • Optional: coil spring

Print Setup

  • Filament: Recycled PET from soda bottles
  • Layer Height: 0.3mm
  • Speed: 60mm/s
  • Raft: True

 

 

Tags