Jeep XJ vent window post
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
You can find replacement handles for your smoker windows in pre-97 XJs, but the mount is nowhere to be found. Until now.
- Ocena
- 0 / 5
- Polubienia
- 12
- Pobrania
- 75
- Wydruki
- 0
- Wyświetlenia
- 793
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Automotive
- Licencja
- Creative Commons — Public Domain
Did your vent window latch break, and the post is no longer usable? Well mine was when I bought my XJ. Instead of doing the easy thing and pulling a full vent window assembly from the junkyard, I decided to recreate the full post.
If you actually intend to use this in your jeep, you will need to print this in at least PETG. ABS/ASA is better if you live somewhere hot.
Please note that I am not sure if the “figure eight” base is the same in all smoker windows, or just mine. I created the base in Fusion 360, got fed up, and finished it in OpenSCAD. Both project files are included if you want to peek at those and witness a nightmare of bad practices. Included in the OpenSCAD file is the source for the nut, and a WIP of the button. The threads are not a standard size.
I have been using this in my XJ for a week or two and seems to be doing fine. Any updates will be based off of my experiences.