Liczymy pasujące modele…
Jeep Cherokee XJ 1 gen 2door seat trim around lever that fold seat - the crack after time best to print vertical with only neccesary organie supports as in Gcode attached, fits both sides - the same PETG Prusament - urban grey, fit the…
For 1997-2001 Jeep XJ I used this tweeter: https://www.amazon.com/gp/product/B075W3NPQ2/ref=ppx_yo_dt_b_search_asin_title?ie=UTF8&psc=1 Printed in ABS then coated in chassis paint for more uniformed look. Uploaded STL, 3MF and the STP…
I took Renafox's Jeep Cherokee model on Sketchfab and made it into a shell. You can find Renafox's model here: sketchfab.com/3d-models/jeep-cherokee-3fdd9619be2c4e7b809888d08cbdab88 . Then I removed the windows for FPV. I added my…
The 144mm model is at 10th scale to the real thing. I printed the 72mm version with a 0.2mm nozzle so that it's not so big on the keyring. If you're printing with a standard 0.4mm nozzle you might want to play with the scale to get the…
Just a simple switch panel I knocked up to replace the stock one in my 1998 Jeep Cherokee and that a few of my friends now run as well. I designed it to get rid of the 12V socket (lighter) and instead I run a screw in dual USB outlet with…
This is my best fan design, to date. Recommend 0.15mm layers or smaller, any filament, should print without support but might need a brim. The tail might improve flow ~10%, the intake only about ~2%. Graph shows a rough system curve for…
Keychain Jeep Cherokee XJ / klíčenka Jeep Cherokee XJ
After some driving i broke my rubber mirrors. Instead of buying new i made some folding mirrors. These mirrors are for the Team Raffee Co. Cherokee XJ Hardbody. The mirrors are printed in place. No screw needed. You only need an M2x6mm…
This started out as a minor modification to Titan's existing design for a friend and quickly snowballed in to nearly a complete redesign. What was changed. -Fixed a ton of miscellaneous geometry errors. -Rebuilt factory switch sockets.…
This is a remix of nonnux's 3D scanned design for the Jeep Grand Cherokee WJ Wheel Center Cap. https://www.thingiverse.com/thing:2453570 I lost a wheel center cap for my 2001 Jeep Cherokee Classic XJ that has the 16" ICON wheels. nonnux's…
measured off of my 98 Cherokee xj and a standard beer can NOTE: I do NOT condone drinking and driving
Made using my 98 Jeep XJ. The Auxbeam is from a wholesaler so just be sure to measure to make sure that this mount fits. I made 3 versions. just NOTE that it is a press and tight fit so if you need to get it out once it is screwed in…
Tested on a 1996 Cherokee sport, this bracket replaces the OEM bracket that becomes brittle over time. May work for other Jeep models and years
This is just a modified version of my existing switch plate that uses six factory switches and the lighter plug. While you can bridge the openings for the factory switch latches, you get better results with supports. That said, I…
i made this off of my 98 Jeep Cherokee Xj. will fit a 97-01 XJs. My aftermarket headlights have blinkers integrated so i was able to remove them. The bracket is designed with full adjustment for a 7'' led light bar on amazon. see below.…
This is a dash kit to hold a single din aftermarket radio and 5 round switches. Way stronger version then the ones you will find online for sale. Just slide your radio cage through the hole bend a few tabs to hold it in place and slide in…
Print in PLA or PETG 0.4mm nozzle with no supports
Mopar 55155622AB, Jeep XJ/ZJ/WJ 1997-2004 "Jeep" Emblem for hood and trunk lid Original designer: DaimlerChrysler AG, Stuttgart / DaimlerChrysler Corporation, Auburn Hills, MI. I disallow commercial use of this model. I'm not sure about…
Jeep Cherokee XJ Auxbeam 6gang Mount. made off of my 98XJ. i modded my 8gang model and measured my 6gang in my truck i have not test fit but if you have issues i'm more than happy to fix the file and re upload. should be a nice press in…
measured off of my 98 XJ and a 2.5'' can. *pictures are not correct as i didn't want to upload pictures of my first model *
Made this because I didn't want to use the fuse holder from JeepCables, it was too big, and I didn't want to zip-tie it either. Kept original license of original model.
Really like Leander's model, tweaked one of my fans to work in it. Showed a peak of 4m/s (1000ft/min) flow with it clamped down, and some silly amount of cranking. Decided to bypass the rachet mechanism, so it's mounted direct to the…
This is the Oval-shaped firewall boot / grommet for the Engine Control Harness used by the 4.0L AMC engine. Used by AMC Jeep Chrysler from 1984-1996. It was commonly found in the engine bay of the Jeep Cherokee Comanche XJ MJ. It is exact.
This is a switch panel I made, the original didnt have enough slots for switches for the aftermarket parts that where being added to the vehicle. I tested this print and adjusted it a lot so it would work well. I used prusament petg…
Center latch was broken on my '87 XJ before I bought it . Designed this one off of pictures online and the pieces left. Here's another option: 84-96 Jeep Cherokee Center Console Latch by Josh Nez I haven't used this model but this…
Replacement for rubber mounting grommets that hold the side panels on my 1982 Yamaha Maxim XJ650 J and other similar motorcycles. These esoteric rubber parts tend to stiffen and crack before other parts wear out on these now ~40-year-old…
Replacement part for Sunshield clip in Jaguar XJ40. Before print rotate part for 90 for more strength. PETG or SDS recommended
Print flat, then install upside down. The part is thicker around the gear selector, but there isn't room for that reinforcement on the top, so it has to be on the inside. Use a semiflexible filament for best results, I used PLA+.
This is a grommet which goes over the front brake lines in a Jeep Cherokee XJ. The grommets go in the holes in the front wheel wells, where the brake line passes through from the engine bay to the wheel wells. I made these with TPU 15%…
General Description: This body is a gigantic pile of smooth plastic. It needs some refinement. To mount the body on an SCX10 there are also body mounts available here on my Pritables Site. L and R mean left and right. Most parts are…
Mopar 55156555AE, Jeep XJ/ZJ/WJ 1997-2004 "4x4" Emblem Original designer: DaimlerChrysler AG, Stuttgart / DaimlerChrysler Corporation, Auburn Hills, MI. I disallow commercial use of this model. I'm not sure about the exact dimensions, but…
Best printed with slightly flexible filament (PETG), but PLA should work too. The brackets are purposefully the slightest bit too short (no tolerance was added in model), so tightening the mounting screws will put pressure on the amp and…
I want to reuse the MGN12C linear rails with leftover parts from my old printer to build a new CoreXY using ZeroG Mercury One X and Y parts Noted that this is a work of Progress, Use this at your own risk
Cup and phone holder XJ cherokee made for 1996 back, slips over e-break. It may fit newer cherokee if it does post about it.
Pipe clip similar to the smaller version C327461 for brake pipes but 0.25" for coolant vent pipes. Category: Automotive
Tired of those broken flappy unsynchronized louvers on you X300 or X40 center vent? This might help. It is a replacement synch/tab for that brittle broken one that fell apart long ago. (Edit: 2023 update) The files have now been updated…
This is a replacement main gear for the HVAC blend door actuator that tends to crack and break with age. From what I could find, this gear should also work for various Jeep, Chrysler, Ford, GM and Mercedes Benz vehicles if you are unsure,…
This is a switch blank for a Jeep Cherokee Comanche XJ MJ. Used by AMC / Chrysler as a dash blank from 1984-1996. It's dimensionally spot on. Enjoy!
Like so many other XJ owners on the internet I too encountered a completely stuck fuel pump retaining ring. After attempting to remove it using the ‘hammer and scredriver' method and only marring the cap I went looking for other…
This is a seat belt sleeve that wraps around the lower seat belt mount point on a drivers / passenger side seat belt. This design was measured off the OEM Jeep comanche bench-seat seat belt sleeve. If you have a cherokee, subtract ~2in in…
This is a replacement Throttle/Accelerator Linkage bushing for the Jaguar XJS, but should also fit the XJ12. Tested this on my 88 XJS and it works beautifully. Print in TPU or similar flexible if at all possible . Included are two files…
Replacement for the rubber relay holder under the gas tank on my 1982 Yamaha Maxim XJ650 J and other similar motorcycles. These esoteric rubber parts tend to stiffen and crack before other parts wear out on these now ~40-year-old…
Vent cover modeled to fit in the foot well vent hole of a Jaguar XJS. My suggestion would be to print this in a material that can resist some amount of heat. PLA will most likely warp due to the heat in the car/from the vent. This model…
PRELIMINARY (WARNING UNTESTED). (BUT NOW PRINTED VIA MJF IN NYLON). Presented here are the internals for post H&E early XJS Convertible rear window motor. These were designed from real but worn out parts. A 50 tooth gear, and the rubber…
Inner mount for Jeep XJ's rear cargo cover Tested on a 1995 Cherokee, I would assume it fits 1984-2001 but ymmv (pun intended)
This is a bezel to install a single din radio in a Cherokee XJ. I didn't find any basic install kits on here so I measured my broken one I had and printed this. If it is angled just right it will fit on a 220x220 print bed face down and I…
A Bin for your Jeep Xj's Cupholder, designed specifically to fit the back cupholder which doesnt actually hold a cup (unless its like, a really small one or something) Printed in PETG, PLA may work but i would not recommend it due to…
This is a clone of the Brake booster spacer present on the 1996+ XJ brake booster assembly. This is dimensionally accurate and measured off of the genuine chrysler booster+master combo found on the 1996+ cherokee XJ. The original part was…
When restoring a Turbo Seca (XJ650LJ) i picked up, i could not find a replacement air filter since the air box is only for this model (turbo version) made for two years. So i bought one that would fit within the air box from a Moto Guzzi…
The diameter of the inner circle is 31.70mm so in theory it might also work on any motorcycle with the same fork diameter. Print this with TPU only!
The old inserts broke when taken out of the grill, one survived and was used to create a 3D CAD file. Recommend ABS/PETG, using 100% infill. You may need to scale this model up or down a smidge to get it to fit. Use atleast 3 walls.
Mounts the Loxjie A30 dac+amp under a desk. Body mount needs to be mirrored and printed twice for left and right. One screw per side. Bracket included for the power brick, two screws.
Replacement for the rubber wire terminal boots found on the solenoid-to-starter-motor cable and other places on my 1982 Yamaha Maxim XJ650 J and other similar motorcycles. These esoteric rubber parts tend to stiffen and crack before other…
I'm adding fuzzy skin to the "required" list, it helps immensely with PETG. Unknown for TPU but I assume it's the same. This is a replacement for the rubber fuel pump mounts/collars for the Jaguar X300 (XJ6/XJ12/XJR). As I recently found…
This is the relay cover cap used in the engine bays of the Jeep cherokee and comanche from 1984-1996. The original part has holes in it, but this is completely solid for longer life. Print this in a high temperature plastic or ABS so it…
This is a third brake light assembly I designed around a cob led strip light to replace the dated OEM light. I tossed mine when I stripped my interior and wanted to design my own so here's what I came up with. I printed this in ABS CF as…
This is the Open Source version of the E-by-J Infrared Camera. This is a complex DIY project that requires exact electronic components, wiring, and setup commands. Note that throughout much of 2020, the increased demand for thermal…
Yamaha XJ900 brake fluid reservoir gasket
PRINT IN TPU SO IT'S FLEXIBLE AND OIL/GAS RESISTANT This is a replacement elbow for the PCV/Breather on a Jaguar V12, P/N#C44386 I made the top of the elbow flat enough that it can be printed upside down, no supports necessary. Might have…
With this part you can have new angles on the camera without need to fixing it to the wall.
Derivative of the snap in clip locating the PM5 Connector for the AC Compressor on a Facelift V12 Jaguar XJS. This model is threaded w/ a nut instead of a snap-in stud and spring-umbrella. 2 Versions available: One with stud attached to…
Dip stick for a 1982 Yamaha XJ1100 motorcycle for middle and rear units. I believe it fits the XS 1100s too. Based on measurements I found online because I didn't have an original. I don't remember where I looked up the dimensions. Use…
I designed a mount so that I could put a caddx vista on top of my aio on this 3" quad. The mounting pattern is 26.5x26.5mm. The Canopy is a remix from thingiverse, I only changed the antenna mount so that the original vista antenna fits…
This is a model of a cupholder-inlay for the centre armrest of a Jaguar X308. It is split into two pieces (A & B) in order to accomodate as many printers as possible, but there is also a file available which is a union of the two pieces.
I modified an existing 3d print for post 94 models (linked below -- thanks to MechEgnr for letting me share) to fit pre-94 XJs. This is larger than the other model and offers three centered clips as opposed to the four clips on the other…
I'd be surprised if anyone downloads this one :D Takes 8x3mm magnets.
I made this cup holder since the jeep xj does not have any, which is very annoying for daily use and if you are offroading. This cup holder fits cans and yeti thermos just fine and they wont fall out (unless you role your rig. Keep the…
Replacement lid for swing arm of a Yamaha XJ 600 51j. Maybe suitable for other applications. Since it is an automotive part, it should be printed in ABS or ASA. Print Settings Printer Brand: Creality Printer: Ender-3 V3 KE **Rafts:**…
I pulled a design from grabcad and remade it into 2 4" round taillights and split the body for smaller 3d printers to handle it. Will include the .step file so you can either reassemble the split or modify/clean up the housing. Post a…
Description / Why I made it So this model was made for my brothers car that suffered from a common problem as I understand it. The side bumpers on the Jaguar XJR (XJ40) have pegs molded into the plastic and these are supposed to fit into…
End caps Yamaha xj 900 Some things are no longer produced. After a request I designed these caps. After the second attempt the cap fit. A happy motorcyclist ready for the next ride. For printing I used variable layer height 0.15 with…
Part Number: 16G-26143-00
Jaguar XJ Series 1 stl is a high-quality scale model of a real civilian car for 3d printing, display, and diorama builds. Use it for automotive collection pieces, model car layouts, desk or shelf display, and garage or road-themed…
xj650 side panels I have not printed the right side yet due to out of filament but should work. print the right side at your own risk :) and tell me how it goes. the left side was printed at 100 infill with supports everywhere. will fit…
Extension ring for the Ambiano Food Dehydrator XJ-14709C0 to dry any standard size spools (some similar dehydrator models might be compatible as well). Multiple rings can be stacked to dry multiple spools at once. The ring is split into 6…
Adapter Heckrollo Kia Sorento XJ zu XM
I've modified the design compared to the first iteration that I installed on my car, so this should work fine, but I'm including the STEP file if it needs modified, since I don't want to go through the trouble of printing another and…
a minespiner keyrambit
A shallow XJ-style interior built for my Traxxas TRX-4 Sport High Trail with an aftermarket Cherokee hardbody. It clears the chassis beneath a raised front floor and a higher cargo cover. The photos show the finished painted installation.…
I made this as I don't smoke, and would rather have a phone holder than two ashtrays...so here is what I came up with. Works good. You'll have to cut some of the excess carpet under it to get the clearance you'll need. It's stepped to…
Cherokee XJ Sunvisor Bushings. Mine were missing, printed in PETG. They fit pretty tight.. Fits for my 1996.
I was unsatisfied with the print quality of other models on the market so I made my own based on those available. I have tweaked the dimensions for a better fit and slightly better visibility. Sized for a cobra mini 19 but the blueprints…
IMPORTANT!!: use this at ur own risk it is still not fully tested yet, if the wrong filament use it may melt and break the engine RECOMEND!!: i strongly recommend to have the part 3d printed in metal or anything heat resistance of 180c…
for older I believe pre 89 Comanche/Cherokee MJ/XJ, replaces the clock, and holds 4 of the smaller style Toyota switches, will add a picture once I have mine installed on my 87 MJ
This is a plug to block off the AAV inlet on the Jag V12. I'm sure we all know how troublesome the AAV is on these cars, it's failed on every single one I've bought... so here's my solution. I don't know the long-term effects of blocking…
Porta avvitatore a batteria BLACK + DECKER A7073-XJ
I made this to replace the original cigarette lighter base as the base kept popping out of the wood ski jump. Uses this led holder: https://www.amazon.com/your-orders/search/ref=ppx_yo2ov_dt_b_search?opt=ab&search=led+socket and these…
The 2 lenses of the interior ligth (l;eft and right) where slowly decaying. So i draw some lenses to print them and replace them. If have printed them in clear petg and standing up with minimal support. Place the part on the face in your…
Das Modell von https://www.printables.com/model/929117-ryobi-router-vacuum-adapter-for-nilfisk-multi-ii-3/files hat mich inspiriert, dieses Konzept auch für die DeWalt DCW604 umzusetzen. Verwendete Hardware 2× Metallstangen Ø 7 mm, ca.…
Made this for a 1995 Jeep Cherokee. It fits in the antenna pass through hole on the main body. Not the top of the fender! It's rained a couple times since install and so far so good it hasn't leaked. Printed in TPU with 4 or 5 walls and I…
This takes the old-style Lucas pump with the side outlet and allows you to install the newer-style and easier to get inline pump (i.e. from an HE XJS or similar) into the stock mounting bracket. Print two, in some kinda flexible filament…
So this is for the Base (convertable in my case) rear speakers. The original mid range speakers were an odd specimen no longer availalbe. So what I did is I found a mid range speaker (Dayton Audio RS150-4), 6 inch and moved it forward…
This is a side-cover-thingy for a Jaguar XJS front seat, mine is 1992 (first facelift) but it should also fit the later facelifts as well. I don't think pre-facelift models have this exact cover. It's not perfectly 1:1 with the original,…
Slouzi pro nalisovani kuzelikovych lozisek do hlavoveho slozeni na motorce. Podlozit oriskem z goly a stahnout zavitovkou.
I performed my first valve timing adjustment on my '82 Yamaha XJ650, and ended up with four old shims. I don't want to throw them out, but I don't have a big collection or shim kit to save them with. Instead I printed them into this model…
If you're like me and were almost done with your carb clean/rebuild for... a while, you might also be like me and want a plug to keep critters from crawling into your engine via the intake boots. I swapped out the shop rags stuffed in the…
Made to print in TPU since that has a little give. Has held up for approximately 1.5 years in southwestern US heat with no issues. Credit to BenK for original model.
This is a flexible panel that sits at the bottom of the instrument cluster right above the steering wheel. My original one was deteriorating a bit and I reverse engineered it and came up with this. Some of the small holes may be off…
Adapter to mount a Duka LS-P / LS-1 / IIDA DM-01 / Luxjet LS-1 distance meter on a camera to be used as a rangefinder. Made specifically for my Instax SQ1 mod with the back surface of the meter exactly on the film plane, but can be used…
This model is intended to be used with a Top mounted rail I made this because my X bar was a bit shorter than intended and i experienced some play on the X bar
