1 / 3
1983(or higher) yamaha xj quad to dual carb convertion — zdjęcie 1
1 / 3

1983(or higher) yamaha xj quad to dual carb convertion

Zamów wydruk tego modelu

Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.

Zapisane na tym urządzeniu.

Convertion piece for ur yamaha xj to go quad to dual carb

Ocena
0 / 5
Polubienia
0
Pobrania
12
Wydruki
0
Wyświetlenia
131
Oceny
0

Aktualizacja u źródła:

Informacje o modelu

Źródło
Printables
Kategoria
Accessories
Licencja
BSD License

IMPORTANT!!: use this at ur own risk it is still not fully tested yet, if the wrong filament use it may melt and break the engine

RECOMEND!!: i strongly recommend to have the part 3d printed in metal or anything heat resistance of 180c and resistance to chemical like fuel

u will need a 40mm carburator rubber adaptor from the carburator side of the intake, use a pwk 34 carb for best result with the head

instruction: print the header twice rotate one of them 180 degres for the angle to face thoward the middle of the bike, modification around the bike throttle body cable and fuel line are up to you to decide

100% infill 

Tagi