Yamaha XJ Engine Shim Souvenir
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Display storage for extra Yamaha XJ motorcycle engine shims
- Ocena
- 0 / 5
- Polubienia
- 0
- Pobrania
- 10
- Wydruki
- 0
- Wyświetlenia
- 474
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Automotive
- Licencja
- Creative Commons — Attribution — Share Alike
I performed my first valve timing adjustment on my '82 Yamaha XJ650, and ended up with four old shims. I don't want to throw them out, but I don't have a big collection or shim kit to save them with.
Instead I printed them into this model creating a curious display object/paperweight to keep in my office. Plus, someday I can always break them out if they're needed!
Printing
Print this with pauses after each section, and insert your shim. The model is designed so the printer will bridge over the shim after it's inserted and continue printing. See my GCODE file for an example. I didn't use M601 pauses I didn't want my nozzle to cooldown, so I used G4 dwells for 10 seconds instead. I had to act fast and insert the shim, and then clean drool off the nozzle before it continued to print, but it worked well.
Model
This is designed for 29mm diameter, ~2.7mm thick shims. I've included STEP and Fusion360 files for modification. In Fusion, you can change the parameters of the rectangular pattern to change the number of shims the model fits, or comment and I can make one for you.