Anycubic Photon Mono Wash & Cure adapter
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
I've seen several Photon Mono adapters for Wash & Cure, but I didn't feel like twisting and unscrewing the mount every…
- Ocena
- 5 / 5
- Polubienia
- 9
- Pobrania
- 104
- Wydruki
- 2
- Wyświetlenia
- 1347
- Oceny
- 1
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Accessories
- Licencja
- Creative Commons — Public Domain
I've seen several Photon Mono adapters for Wash & Cure, but I didn't feel like twisting and unscrewing the mount every time, and I also wanted to use the metal bracket that came with the kit rather than throw it away.
The difference with my adapter is that it fits over the original metal bracket, which adds rigidity and reliability. No additional screws are used here, since there are no heavy loads during operation. Simply place the mounting plate into the groove at the top. In my opinion, this is easier and more convenient.
Print instructions
The width of the connector may be a little narrower than possible, but I figured that was enough.
Supports:
No
Resolution:
0.2-0.3
Infill:
30-40%