1 / 2
Frosthaven Boss Proxy: Lord of Chaos — zdjęcie 1
1 / 2

Frosthaven Boss Proxy: Lord of Chaos

Zamów wydruk tego modelu

Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.

Zapisane na tym urządzeniu.

Here's my proxy model for the Frosthaven Boss, the Lord of Chaos!

Ocena
5 / 5
Polubienia
36
Pobrania
219
Wydruki
2
Wyświetlenia
984
Oceny
1

Aktualizacja u źródła:

Informacje o modelu

Źródło
Printables
Kategoria
Board Games
Licencja
Creative Commons — Attribution — Noncommercial — Share Alike

Here's my model for the Frosthaven Boss, the Lord of Chaos!  I made it as self-supporting as possible, but there's still several outstretched limbs that're gonna need supports.  Fortunately, none of the “interior” of the model has overhangs that need supports, so it's pretty easy to remove the supports that are required.

As always, the .blend file and pre-supported .3mf (including the one that I used to print this on my Prusa MK3, although the support points should work for SLA printers) for this model are available to my patrons at https://patreon.com/VirtuallyJason. If you appreciate my work and have a few dollars to spare each month, please consider joining!

Tagi