1 / 2
Shoebill Stork with Finger Guns
Zamów wydruk tego modelu
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Model of a shoebill stork with a... slight... modification to the body
- Ocena
- 5 / 5
- Polubienia
- 25
- Pobrania
- 150
- Wydruki
- 2
- Wyświetlenia
- 1023
- Oceny
- 2
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Sculptures
- Licencja
- Creative Commons — Attribution — Share Alike
SzczegółyPliki (1)Wydruki i komentarze (Wydruki: 2) (Komentarze: 4)Remiksy (0)Kolekcje (23)Powiązane
What is this?
I don't even know, really. It's a shoebill stork, but with finger guns.
Why did I make it?
I have a friend who hates shoebill storks, and I thought to myself “how can I print a shoebill stork, but even worse?” I think I'd reasonably call this a success. I just merged portions of each of the two remixed meshes together.
How should you print it?
Print settings that I used for this print on my X1-Carbon:
- Material: PLA
- Layer Height: 0.20mm
- Infill: 10% Gyroid
- Support: Definitely enabled. I used the tree(auto) support in Bambu Studio which worked out nicely.
- Brim: 5mm outer brim. I added this just to be safe since basically the entire model was suspended by the support structure and I wanted some extra confidence in my bed adhesion on the Bambu cold plate.
- Print orientation: Back of the model was face-down. This nicely left all of the support interface along the backside.
This is my first upload :) There are some areas that could have been smoothed out, but I'm fairly happy with the outcome.