1 / 2
Shoebill Stork with Finger Guns
Order a print of this model
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
Model of a shoebill stork with a... slight... modification to the body
- Rating
- 5 / 5
- Likes
- 25
- Downloads
- 151
- Makes
- 2
- Views
- 1,030
- Reviews
- 2
Updated at source:
Model information
- Source
- Printables
- Category
- Sculptures
- License
- Creative Commons — Attribution — Share Alike
What is this?
I don't even know, really. It's a shoebill stork, but with finger guns.
Why did I make it?
I have a friend who hates shoebill storks, and I thought to myself “how can I print a shoebill stork, but even worse?” I think I'd reasonably call this a success. I just merged portions of each of the two remixed meshes together.
How should you print it?
Print settings that I used for this print on my X1-Carbon:
- Material: PLA
- Layer Height: 0.20mm
- Infill: 10% Gyroid
- Support: Definitely enabled. I used the tree(auto) support in Bambu Studio which worked out nicely.
- Brim: 5mm outer brim. I added this just to be safe since basically the entire model was suspended by the support structure and I wanted some extra confidence in my bed adhesion on the Bambu cold plate.
- Print orientation: Back of the model was face-down. This nicely left all of the support interface along the backside.
This is my first upload :) There are some areas that could have been smoothed out, but I'm fairly happy with the outcome.