Print in Place Noisemaker
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
The traditional wooden noisemaker, now plastic! A print in place design with quick cleanup makes this an easy favorite!
- Ocena
- 4,75 / 5
- Polubienia
- 261
- Pobrania
- 1540
- Wydruki
- 8
- Wyświetlenia
- 4331
- Oceny
- 8
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Music
- Licencja
- Creative Commons — Public Domain
The classical wooden noisemakers, now in a simple, print-in-place design! After a quick print, and easy post-processing, you'll have a delightful little noisemaker. Great for parties, parades, and anywhere else that needs a little noise.
Printing Tips:
- Print in a hard filament (PLA, PETG, etc.)
- NO SUPPORTS
- Double check slicer to make sure parts do not overlap and have gaps between layers
- Print with the large base flat to the build plate, with the handle upright
- For best results, ensure thin vibrating section is two print widths (continuous down and back on printer)
Examples were printed with the following settings:
- Printed in PETG (235°C nozzle, 70°C bed)
- 0.2mm Layer Height
- 20% infill
- 70mm/s print speed
- Thin walls on
- No Supports
Post-Processing Tips:
- Give firm twist to separate parts if they are not loose
- Slowly twist handle back and forth to smooth surfaces between parts
- Use a small hobby knife to clean any small globs or strings
- Enjoy!