Print in Place Noisemaker
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
The traditional wooden noisemaker, now plastic! A print in place design with quick cleanup makes this an easy favorite!
- Rating
- 4.75 / 5
- Likes
- 261
- Downloads
- 1,540
- Makes
- 8
- Views
- 4,331
- Reviews
- 8
Updated at source:
Model information
- Source
- Printables
- Category
- Music
- License
- Creative Commons — Public Domain
The classical wooden noisemakers, now in a simple, print-in-place design! After a quick print, and easy post-processing, you'll have a delightful little noisemaker. Great for parties, parades, and anywhere else that needs a little noise.
Printing Tips:
- Print in a hard filament (PLA, PETG, etc.)
- NO SUPPORTS
- Double check slicer to make sure parts do not overlap and have gaps between layers
- Print with the large base flat to the build plate, with the handle upright
- For best results, ensure thin vibrating section is two print widths (continuous down and back on printer)
Examples were printed with the following settings:
- Printed in PETG (235°C nozzle, 70°C bed)
- 0.2mm Layer Height
- 20% infill
- 70mm/s print speed
- Thin walls on
- No Supports
Post-Processing Tips:
- Give firm twist to separate parts if they are not loose
- Slowly twist handle back and forth to smooth surfaces between parts
- Use a small hobby knife to clean any small globs or strings
- Enjoy!