250ml Flask Centrifuge Holder
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
This is a simple adapter to fit a 250ml flask in a larger rotor. I have printed with PETG and tested up to 300g. Be…
- Ocena
- 0 / 5
- Polubienia
- 1
- Pobrania
- 24
- Wydruki
- 0
- Wyświetlenia
- 221
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Tools
- Licencja
- Creative Commons — Attribution — Noncommercial
This is a simple adapter to fit a 250ml flask in a larger rotor. I have printed with PETG and tested up to 300g. Be careful using this with higher speeds. Use it at your own risk. Pay attention to material properties. Do not print with flexible and soft materials.
Print Settings
Printer Brand:
Prusa
Printer:
I3 MK3S
Rafts:
No
Supports:
No
Resolution:
200
Infill:
20
Filament: GreenTec PETG Green How I Designed This ===================
Design is simple. In FreeCAD I made a sketch and rotated it around Z axis. Then I added the walls again with a sketch and extruded it. This is then duplicated with a polar pattern to give more stability to the design.
Category: Machine Tools