OneWheel Pint handle (replacement)
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
MagHandle on my OneWheel Pint broke (great design OneMotion!).
- Ocena
- 0 / 5
- Polubienia
- 12
- Pobrania
- 80
- Wydruki
- 0
- Wyświetlenia
- 958
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Outdoor Sports
- Licencja
- Creative Commons — Attribution — Noncommercial — Share Alike
MagHandle on my OneWheel Pint broke (great design OneMotion!).
Instead of replacing it with stock one I decided to try a 3D printed one.
Handle is designed around two stop rings (5 mm inner diameter, 10 mm outer diameter, M3 setscrew) and two M3x14 (or M3x16) screws to transfer weight from D 5 mm axis (smooth rod).
You can use D 5mm magnet to hold handle in position in similar fashion as original one but as the new handle is pretty tigth fit it is not usually necessary.
2022.03 - V2 - A bit more rounded design of handle
Print instructions
1) Print with enough infill.
2) (Super)Glue two parts together.
3) Glue in 5 mm magnet
4) Insert stop rings D5/10mm. Use M3x14 screws instead of setscrews. Screws shall not protrude into inside of free space in the stop rings (otherwise, you will not be able to insert axis)
5) Install handle - use D5mm (60-65 mm long) smooth rod as axis