OneWheel Pint handle (replacement)
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
MagHandle on my OneWheel Pint broke (great design OneMotion!).
- Rating
- 0 / 5
- Likes
- 12
- Downloads
- 80
- Makes
- 0
- Views
- 958
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- Outdoor Sports
- License
- Creative Commons — Attribution — Noncommercial — Share Alike
MagHandle on my OneWheel Pint broke (great design OneMotion!).
Instead of replacing it with stock one I decided to try a 3D printed one.
Handle is designed around two stop rings (5 mm inner diameter, 10 mm outer diameter, M3 setscrew) and two M3x14 (or M3x16) screws to transfer weight from D 5 mm axis (smooth rod).
You can use D 5mm magnet to hold handle in position in similar fashion as original one but as the new handle is pretty tigth fit it is not usually necessary.
2022.03 - V2 - A bit more rounded design of handle
Print instructions
1) Print with enough infill.
2) (Super)Glue two parts together.
3) Glue in 5 mm magnet
4) Insert stop rings D5/10mm. Use M3x14 screws instead of setscrews. Screws shall not protrude into inside of free space in the stop rings (otherwise, you will not be able to insert axis)
5) Install handle - use D5mm (60-65 mm long) smooth rod as axis