Low Profile Prusament Filament Clip
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Simple low profile filament clip for Prusament filament rolls.
- Ocena
- 4,667 / 5
- Polubienia
- 38
- Pobrania
- 264
- Wydruki
- 8
- Wyświetlenia
- 1164
- Oceny
- 6
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Accessories
- Licencja
- Creative Commons — Attribution — Noncommercial
Simple low profile filament clip for Prusament filament rolls. Locks filament into place without shifting unlike screw or clip on variations.
Inspired by Pavel's version (https://www.prusaprinters.org/prints/12942-prusament-clip) but has a smaller side profile as I stack my filament rolls side-by-side in my drybox.
As the holding tension relies on the flexural modulus of the material the clip is printed from, I've provided multiple STLs of slightly different lengths. I would recommend trialing a few different lengths to find which one works best with your filament before printing them in bulk.
From my experience, a length of 9.5mm is a good starting point as I print my clips from Prusament's PC-blend. Stiffer filaments (eg. PLA) might need a slightly longer length while more flexible filaments (eg. PETG) may work better with a shorter one.