Low Profile Prusament Filament Clip
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
Simple low profile filament clip for Prusament filament rolls.
- Rating
- 4.667 / 5
- Likes
- 38
- Downloads
- 264
- Makes
- 8
- Views
- 1,164
- Reviews
- 6
Updated at source:
Model information
- Source
- Printables
- Category
- Accessories
- License
- Creative Commons — Attribution — Noncommercial
Simple low profile filament clip for Prusament filament rolls. Locks filament into place without shifting unlike screw or clip on variations.
Inspired by Pavel's version (https://www.prusaprinters.org/prints/12942-prusament-clip) but has a smaller side profile as I stack my filament rolls side-by-side in my drybox.
As the holding tension relies on the flexural modulus of the material the clip is printed from, I've provided multiple STLs of slightly different lengths. I would recommend trialing a few different lengths to find which one works best with your filament before printing them in bulk.
From my experience, a length of 9.5mm is a good starting point as I print my clips from Prusament's PC-blend. Stiffer filaments (eg. PLA) might need a slightly longer length while more flexible filaments (eg. PETG) may work better with a shorter one.