Dash insert for Jeep JK with Vector Off-Road JK E-Dock
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Dash insert with power plug mounting holes Design for use with the Vector Offroad JK E-Dock
- Ocena
- 3 / 5
- Polubienia
- 26
- Pobrania
- 140
- Wydruki
- 0
- Wyświetlenia
- 1938
- Oceny
- 1
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Automotive
- Licencja
- Creative Commons — Attribution — Noncommercial
The Vector Offroad JK E-Dock is a great way to mount electronics in a Jeep Wrangler JK. However, the USB power cables can be unsightly and get in the way. This print adds 4 DC power ports, each with two USB jacks to the top of the dash, keeping the power cords up and out of the way. Just to state the obvious, for this to work, you need to wire the power connectors to a DC fuse panel in your Jeep for this to work. If this is not something you can do, there are automotive installers that can do this for you (this is what I did).
This will get direct sun exposure so plan accordingly when selecting a filament. I would suggest Polymaker PolyLite ASA.