Ikea Ivar steelsheet holder, any Ivar depth
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Yet another two steel sheet holder, for Ikea Ivar system.
- Ocena
- 5 / 5
- Polubienia
- 33
- Pobrania
- 116
- Wydruki
- 2
- Wyświetlenia
- 746
- Oceny
- 1
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Other House Equipment
- Licencja
- GNU Lesser General Public License
the part
Yet another steel sheet holder, with 5 degrees tilted slots so the sheets won't fall.
I made it to fit any Ikea Ivar shelf, but it would not be difficult to remix it for another holding system.
There are two STL : one to use on a left side of the unit, the other for the right side. There is indeed a 5 mm shift between the two slots for an easier grab of the one which stays behind the other.
printing
I did print this in PLA with a 0.4 nozzle and “0.3mm draft” settings in Prusaslicer (I just switched to 15% gyroid infill).
I also did set 100 % infill for the plugs by using a modifier box. Not sure it is necessary.
usage
Plugs are tight, you may have to use some force to make them fit entirely.
source files
For the sake of completeness, I did add the source files.
Python code generate SCAD files that you can then convert to STL.
You need MuSCAD (https://gitlab.com/guillp/muscad) to be able to run the code (pip install muscad).
questions
please fill free to PM me or use comments for any questions, requests or suggestions