Ikea Ivar steelsheet holder, any Ivar depth
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
Yet another two steel sheet holder, for Ikea Ivar system.
- Rating
- 5 / 5
- Likes
- 33
- Downloads
- 117
- Makes
- 2
- Views
- 749
- Reviews
- 1
Updated at source:
Model information
- Source
- Printables
- Category
- Other House Equipment
- License
- GNU Lesser General Public License
the part
Yet another steel sheet holder, with 5 degrees tilted slots so the sheets won't fall.
I made it to fit any Ikea Ivar shelf, but it would not be difficult to remix it for another holding system.
There are two STL : one to use on a left side of the unit, the other for the right side. There is indeed a 5 mm shift between the two slots for an easier grab of the one which stays behind the other.
printing
I did print this in PLA with a 0.4 nozzle and “0.3mm draft” settings in Prusaslicer (I just switched to 15% gyroid infill).
I also did set 100 % infill for the plugs by using a modifier box. Not sure it is necessary.
usage
Plugs are tight, you may have to use some force to make them fit entirely.
source files
For the sake of completeness, I did add the source files.
Python code generate SCAD files that you can then convert to STL.
You need MuSCAD (https://gitlab.com/guillp/muscad) to be able to run the code (pip install muscad).
questions
please fill free to PM me or use comments for any questions, requests or suggestions