Prusa LACK Enclosure Levelling Feet
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
I needed a way to level my LACK enclosures and keep them anchored in place, and these feet were the answer.
- Ocena
- 4,917 / 5
- Polubienia
- 117
- Pobrania
- 715
- Wydruki
- 7
- Wyświetlenia
- 4616
- Oceny
- 12
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Prusa Parts & Upgrades
- Licencja
- Creative Commons — Attribution
Update March 19, 2022: Improved Prusa LACK Enclosure Levelling Feet are now available! I strongly recommend checking out this new version, as it features some improvements that make post-installation level adjustments far easier.
----------
I needed a way to level my LACK enclosures and keep them anchored in place, and these feet were the answer.
There are two versions of the feet to choose from:
The floor version has a hole with a chamfered edge inside the socket that allows the foot to be screwed into the floor.
The leg version has a hole with a chamfered edge outside the socket that allows the foot to be attached to the leg.
For either version, you can insert the provided levelling plates in various thicknesses to individual feet to correct for uneven floors if necessary.
Print instructions
Gcode files are sliced for Prusament PETG on an MK3/S using the 0.20mm SPEED MK3 setting. I used 50% infill for the socket pieces, and 10% infill, 2 bottom layers, 3 top layers and 3 perimeters for the plate parts.
3mf files have been provided for those who wants to do the slicing themselves. The Fusion 360 source file is also available in the files section, and is heavily parameterized for easy tweaking/adjusting.