Upholstery and fabric cleaner
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Insert for cleaning carpets, rugs, sofas, car seats...
- Ocena
- 0 / 5
- Polubienia
- 12
- Pobrania
- 33
- Wydruki
- 0
- Wyświetlenia
- 376
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Other Ideas
- Licencja
- Creative Commons — Attribution — Noncommercial
This is a wet extractor for use with a conventional canister vacuum cleaner. Among the files you will find two jigs to shape the transparent lid (seeing the water being sucked in gives a lot of satisfaction) for those who can't or don't want to build it, I also uploaded the file to print the lid. The shaping jig is longer than the finished lid, so you have the ability to trim it to the correct angle.
I recommend using hot threaded bushings, the classic self-threading bushings due to the quantity (17) of bushings to be inserted, risk damaging the extractor.
For the gasket I used a 1.8mm diameter with a length 356mm,hold in place with a few drops of cyanoacrylate glue.
The intake of the aspirator is 38mm.
The model can be printed without supports, I respected angles that lend themselves well to being printed. As you can see in the images, I added a support in the middle to support the object during the fills which can sometimes be a bit wavy.