Upholstery and fabric cleaner
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
Insert for cleaning carpets, rugs, sofas, car seats...
- Rating
- 0 / 5
- Likes
- 12
- Downloads
- 33
- Makes
- 0
- Views
- 376
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- Other Ideas
- License
- Creative Commons — Attribution — Noncommercial
This is a wet extractor for use with a conventional canister vacuum cleaner. Among the files you will find two jigs to shape the transparent lid (seeing the water being sucked in gives a lot of satisfaction) for those who can't or don't want to build it, I also uploaded the file to print the lid. The shaping jig is longer than the finished lid, so you have the ability to trim it to the correct angle.
I recommend using hot threaded bushings, the classic self-threading bushings due to the quantity (17) of bushings to be inserted, risk damaging the extractor.
For the gasket I used a 1.8mm diameter with a length 356mm,hold in place with a few drops of cyanoacrylate glue.
The intake of the aspirator is 38mm.
The model can be printed without supports, I respected angles that lend themselves well to being printed. As you can see in the images, I added a support in the middle to support the object during the fills which can sometimes be a bit wavy.