Arcade DDR X2 Service/Test Button Board
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Made this to hold a few buttons for my DDR cabinet, but could work for others.
- Ocena
- 0 / 5
- Polubienia
- 1
- Pobrania
- 12
- Wydruki
- 0
- Wyświetlenia
- 242
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Video Games
- Licencja
- Creative Commons — Attribution — Noncommercial
I made this in 3 parts so you can easily change or get to the buttons from the front only.
If you aren't using this on an X2 machine, you can just use the “support” stl to screw it directly to the back and omit the block "mount" stl.
For the “mount” stl, I used some m3 heat set inserts and I think m3x20mm to secure it to the “support”
For the “button” board stl, I just used some m3x10 or 12mm socket head bolts and it should be a tight fit to thread the “support” just fine.
For the Audio knob on top, I used more m3x10mm socket head bolts
The red buttons I think are 13mm ones I had on hand, ordered from Amazon a few years ago, and a cheap USB encoder board (that I used for testing until I make a longer wiring harness to my ipac)
I doubt anyone else is going to actually need to use this exactly as I did, but figured I'd share it for anyone who may want something similar.