1 / 5
Sovol SV06 y-bed carriage with 4 bearing (instead of 3) — zdjęcie 1
1 / 5

Sovol SV06 y-bed carriage with 4 bearing (instead of 3)

Zamów wydruk tego modelu

Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.

Zapisane na tym urządzeniu.

Remixed Sovol's original .step files to use 4 bearing and m4 threaded inserts.

Ocena
0 / 5
Polubienia
13
Pobrania
115
Wydruki
0
Wyświetlenia
1159
Oceny
0

Aktualizacja u źródła:

Informacje o modelu

Źródło
Printables
Licencja
Creative Commons — Attribution — Noncommercial — Share Alike

I printed it in eSun PETG. Because it's under the bed I recommend to print it in PETG, ABS or ASA. Remixed in Tinkercad!

I added a test piece to print and try a m4 insert, to see if it fits properly. If not, you can use xy-compensation/horizon expansion and try again.

Currently it's installed on my SV06 since a few hours after placing this. I also added the bearing mount (from the official SV06 GitHub) to mount the 4th bearing. I printed in PLA for now, but recommend at least PETG. 

The bearings I used are Igus Drylin's, so I haven't any experience with normal bearings and my custom Y-carriage.

 

Print and use at your own risk.

Tagi