Trellis Wall Mount Standoff (125mm total length)
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Trellis Wall Mount Standoff
- Ocena
- 0 / 5
- Polubienia
- 4
- Pobrania
- 39
- Wydruki
- 0
- Wyświetlenia
- 594
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Outdoor & Garden
- Licencja
- Creative Commons — Attribution — Noncommercial — Share Alike
This is a wall mount trellis mount. It's designed to sit level on a wall that has 2.6 degree angle from the siding(The visible siding spacing in these pics is 7" tall and ¼" thick.). Mounted with 2" construction screws after drilling pilot holes. Trellis mounts to the post with zip ties or a screw from below.
I printed these as oriented with three perimeters in PETG in draft mode at .3mm layers at the top of the temp range for strength.
The trellis was built using ¾" pine board cut from a board. Assembled using wood glue and two nails per intersection to help avoid movement.