1 / 4
Trellis Wall Mount Standoff (125mm total length)
Order a print of this model
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
Trellis Wall Mount Standoff
- Rating
- 0 / 5
- Likes
- 4
- Downloads
- 39
- Makes
- 0
- Views
- 594
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- Outdoor & Garden
- License
- Creative Commons — Attribution — Noncommercial — Share Alike
This is a wall mount trellis mount. It's designed to sit level on a wall that has 2.6 degree angle from the siding(The visible siding spacing in these pics is 7" tall and ¼" thick.). Mounted with 2" construction screws after drilling pilot holes. Trellis mounts to the post with zip ties or a screw from below.
I printed these as oriented with three perimeters in PETG in draft mode at .3mm layers at the top of the temp range for strength.
The trellis was built using ¾" pine board cut from a board. Assembled using wood glue and two nails per intersection to help avoid movement.