Wyze OG EMT Conduit Mount
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
An updated, more articulate, version of an EMT conduit mount for a WYZE OG camera.
- Ocena
- 0 / 5
- Polubienia
- 3
- Pobrania
- 37
- Wydruki
- 0
- Wyświetlenia
- 221
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Other House Equipment
- Licencja
- Creative Commons — Attribution — Noncommercial — Share Alike
This is a mount that allows you to attach the WYZE Cam OG to EMT conduit. Remove the factory mount and use an M4 button head screw (or other flat bottom type) to attach the camera to the camera mount. Tighten to your desired level of friction for adjustments. Use an M3 screw and nut to connect the two pieces together. Be careful not to over tighten the screw as it will break the plastic. Some friction is required to prevent sagging and unwanted movement. Click the assembly onto the EMT conduit and adjust the camera angle.
Print everything with the flat side down.
A cable clip can be found here.
An older version is available here.