Dial Detent Spring for Fluke 7X / 2X Series 2 Multimeter
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
This this a replacement for Fluke part # 646679. It's the detent spring that gives the dial its click and locks it…
- Ocena
- 0 / 5
- Polubienia
- 10
- Pobrania
- 93
- Wydruki
- 0
- Wyświetlenia
- 723
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Electronics
- Licencja
- Creative Commons — Attribution
This this a replacement for Fluke part # 646679. It's the detent spring that gives the dial its click and locks it into each mode.
This part was broken in my Fluke 77 Series II so I designed a replacement. It's not an exact copy of the original because I wanted to add some reinforcement structure to it. It will fit snugly into the rest of the original dial parts.
As far as I know, this will work with Fluke 77, 75, 73, 70, 23, and 21 Series II multimeters. It may work with additional models but I'm not certain of it.
Just a note of caution: Various 3D printer materials will have different insulative properties than the original part. After making a modification like this, I wouldn't test the limits of your meter's CAT rating if I were you...
I hope somebody finds this useful!
Print Settings
Printer Brand:
Monoprice
Printer:
Select Mini
Rafts:
No
Supports:
Yes
Resolution:
0.0875mm
Infill:
20
Filament: FlashForge PLA White
Category: Electronics