Prusa i3 MK3S+ MMU2S Compatible Extruder Stepper Cooler Add-on for 40x40 Fan
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
This is a remix of Strathpeffer3D, Magprint3d and eurad's model. It fit's for the Prusa i3 MK3S+ MMU2 Upgrade
- Ocena
- 5 / 5
- Polubienia
- 25
- Pobrania
- 100
- Wydruki
- 2
- Wyświetlenia
- 1071
- Oceny
- 1
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Prusa Parts & Upgrades
- Licencja
- Creative Commons — Attribution — Noncommercial — Share Alike
This is a remix of the models below. Since I am using a Prusa i3 MK3s with MMU2 upgrade and Delta P Fan Duct, the other models did not fit. For this reason this remix.
This model is therefore aimed at those who use a printer in the same configuration as I do.
It is composed of two parts:
1. airduct-delta-p.stl from eurad (but shortened)
2. MMU 2 adapter to be able to fix 1. on the extruder (with four screws)
If needed I can provide the step file of the airduct_delta_p_mmu_adapter.stl model! Just let me know
Print instructions:
Infill: 15 % or higher (gyroid)
Layer: 0,1 mm
Recommended Material: Heat Resitant Material like ABS, ASA, PETG, etc. No PLA!