Hex shaped woven basket with a twist
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
This is a woven basket model that I programmed in OpenSCAD.
- Ocena
- 0 / 5
- Polubienia
- 27
- Pobrania
- 76
- Wydruki
- 0
- Wyświetlenia
- 1026
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Other Art & Designs
- Licencja
- Creative Commons — Attribution — Noncommercial
This is a woven basket model that I programmed in OpenSCAD. Since the rods, base, and weaves are separate STL files it is suitable for being a multi color print.
Print instructions
The resolution of the model in z is 0.2mm, so for best results the layer height should be a multiple of 0.2mm. If you want the full woven effect either print the rods and weaves in a separate color or have them sliced with different setting (or profiles in S3D), otherwise the slicer likely will merge the rods and weaves. The print shown was done on a railcore, with Proto-Pasta Matte Chestnut filament, sliced in PrusaSlicer at 0.2 layer height.