Hex shaped woven basket with a twist
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
This is a woven basket model that I programmed in OpenSCAD.
- Rating
- 0 / 5
- Likes
- 27
- Downloads
- 76
- Makes
- 0
- Views
- 1,031
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- Other Art & Designs
- License
- Creative Commons — Attribution — Noncommercial
This is a woven basket model that I programmed in OpenSCAD. Since the rods, base, and weaves are separate STL files it is suitable for being a multi color print.
Print instructions
The resolution of the model in z is 0.2mm, so for best results the layer height should be a multiple of 0.2mm. If you want the full woven effect either print the rods and weaves in a separate color or have them sliced with different setting (or profiles in S3D), otherwise the slicer likely will merge the rods and weaves. The print shown was done on a railcore, with Proto-Pasta Matte Chestnut filament, sliced in PrusaSlicer at 0.2 layer height.