FrSky Horus X10s Battery Cover
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
This is a replacement battery cover for a FrSky Horus X10/X10S Express.
- Ocena
- 0 / 5
- Polubienia
- 0
- Pobrania
- 22
- Wydruki
- 0
- Wyświetlenia
- 167
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- RC & Robotics
- Licencja
- Creative Commons — Attribution — Noncommercial — Share Alike
This is a replacement battery cover for a FrSky Horus X10/X10S Express. The Express is the version with the Access firmware and has a battery door. The first generation Horus X10/X10S did not have a back which supported a battery cover (however, you can order a replacement back for the new Express versions and replace the back on your older Horus to have the ability to swap batteries as you see fit. Or if you're adventurous, you could cut a hole in the existing cover!
I made this replacement cover/door so that it would allow for slightly larger LiIon batteries to be used. I build my own packs and use 18650 sized sells that are 3500 mAh. These would cause the door to bulge with the stock cover. This replacement has an extra 1.5mm of clearance so that this isn't an issue.
I originally printed this with PLA. It will work, but if you're like me and set your radio in a hot car or in the sun it will not hold up. I suggest using PETG instead. It makes the clip action spring better.
