MK3s+ filament cover with PTFE fitting
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
This is a modified filament cover for the MK3s+ that allows a "reverse bowden" / filament guide setup by installing a…
- Ocena
- 4,9 / 5
- Polubienia
- 114
- Pobrania
- 723
- Wydruki
- 21
- Wyświetlenia
- 2747
- Oceny
- 20
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Prusa Parts & Upgrades
- Licencja
- Creative Commons — Attribution — Noncommercial — Share Alike
This is a modified filament cover for the MK3s+ that allows a "reverse bowden" / filament guide setup by installing a PTFE fitting measuring M6x4.
Please check that the threaded fitting does not protrude on the other side. That is why I mentioned a 4mm length thread.
PS: It works for MK3s also LE: You need a shorter bolt for MK3s otherwise, while tightening, you will thread into the extruder body. Not a big deal as it doesn't affect functionality, but you should be aware.
17.01.21 Added an M10 type FS Cover with 7mm depth. I had to thicken the cover so that it ca still be printed as Prusa intended.